Search results for "Friction stir extrusion"

Process mechanics in Friction Stir Extrusion of magnesium alloys chips through experiments and numerical simulation

2017

Abstract Friction Stir Extrusion (FSE) is a novel process designed to directly recycle machining chips. An experimental campaign was carried out on AZ31 milling chips using variations in extrusion ratio, force and tool rotation rate. The process mechanics were studied and correlated to the material flow, which was elucidated through use of a copper marker. A 3D, Lagrangian, thermo-mechanically coupled dedicated numerical model was set up and validated through temperature measurements. The combination of experimental and numerical results permitted to reconstruct the complex 3D material flow induced by tool rotation and plunge into the extrusion billet chamber.

A numerical model for Wire integrity prediction in Friction Stir Extrusion of magnesium alloys

2017

Abstract A numerical model for the prediction of the wire quality produced by the novel direct machining chip recycling technique known as Friction Stir Extrusion (FSE) is presented. Wire microstructure and wire integrity have been predicted by embedding in the code the equations enabling the calculation of the Zener-Hollomon parameter as well as the W parameter of the Pivnik-Plata solid bonding criterion. The proposed model, developed for the AZ31 magnesium alloy using the commercial simulation package DEFORM, is 3D Lagrangian, thermo-mechanically coupled with visco-plastic material behavior. The model was first validated against experimental temperature measurements and then used to predi…

Influence of processing parameters and initial temper on Friction Stir Extrusion of 2050 aluminum alloy

2017

Abstract Friction Stir Extrusion is an innovative production technology that enables direct wire production via consolidation and extrusion of metal chips or solid billets. During the process, a rotating die is plunged into a cylindrical chamber containing the material to be extruded. The stirring action of the tool produces plastic flow in the extrusion chamber, densifying and heating the charge so that finally, fully dense rods are extruded. Experiments have been carried out in order to investigate the influence of process parameters and initial temper of the base material on the process variables and on the extrudates’ mechanical properties.

Design of continuous Friction Stir Extrusion machines for metal chip recycling: issues and difficulties

2018

Abstract Friction Stir Extrusion is an innovative direct-recycling technology developed for metal machining chips. During the process, a rotating die is plunged into a cylindrical chamber containing the material to be recycled. The stirring action of the die prompts solid bonding phenomena allowing the back extrusion of a full dense rod. One of the main weakness of this technology is the discontinuity of the process itself that limits the extrudates volume to the capacity of the chamber. In order to overcome that limitation, a dedicated extrusion fixture has to be developed, keeping into account the concurrent needs of a continuous machine. The geometry of the die has to ensure proper press…

AZ31 magnesium alloy recycling through friction stir extrusion process

2015

Friction Stir Extrusion is a novel technique for direct recycling of metal scrap. In the process, a dedicated tool produces both the heat and the pressure to compact and extrude the original raw material, i.e., machining chip, as a consolidated component. A proper fixture was used to carry out an experimental campaign on Friction Stir Extrusion of AZ31 magnesium alloy. Variable tool rotation and extrusion ratio were considered. Appearance of defects and fractures was related to either too high or too low power input. The extruded rods were investigated both from the metallurgical and mechanical points of view. Tensile strength up to 80 % of the parent material was found for the best combina…

Friction stir extrusion to recycle aluminum alloys scraps: Energy efficiency characterization

2019

Abstract Solid state recycling refers to a group of processes allowing direct recycling of metals scraps into semi-finished product. Their main advantage lies in avoiding the molten state of the material which badly affects the environmental performance of the conventional (remelting based) recycling routes. It is expected that such process category would lower the environmental performance of metals recycling. In this paper, the friction stir extrusion process for aluminum alloy AA 2050 wire production is analyzed under the primary energy demand perspective. The process electrical energy demand is quantified with varying process parameters. An empirical modelling approach was applied and a…

Al-SiC Metal Matrix Composite production through Friction Stir Extrusion of aluminum chips

2017

Abstract The production of most mechanical component requires machining operation, thus usually implying the cut material to be wasted as scrap. Traditional recycling techniques are not able to efficiently recycle metal chips because of some critical aspects that characterize such kind of scraps (shape, oxide layers, contaminating residues, etc). Friction Stir Extrusion is an innovative solid state direct-recycling technique for metal machining chips. During the process, a rotating tool is plunged into a hollows matrix to compact, stir and finally, back extrudes the chips to be recycled in a full dense rod. This process results to be particularly relevant since no preliminary treatment of t…

Influence of process parameters on the product integrity in friction stir extrusion of magnesium alloys

2016

Friction Stir Extrusion is an innovative direct-recycling technology for metal machining chips. During the process a specifically designed rotating tool is plunged into a cylindrical matrix containing the scraps to be recycled. The stirring action of the tool prompts solid bonding related phenomena allowing the back extrusion of a full dense rod. This process results to be particularly relevant because allows the reuse of the scrap without any previous treatment. Experiments have been carried out in order to investigate the influence of the process parameters on the extrudes quality and a numerical model has been developed in order to simulate the evolution of the material flow.

Design and development of a new machine tool for continuous friction stir extrusion

2023

In the present paper the Continuous Friction Stir Extrusion process (CFSE), derived from the already known Friction Stir Extrusion (FSE), is proposed for effective solid-state recycling of metal scraps. A new dedicated machine tool was designed and developed. A Lagrangian implicit thermomechanical numerical model was set up and used to determine the proper ranges of the most relevant process parameters. An effective case study is proposed, involving the actual extrusion of a recycled wire in a continuous way. Metallurgical observations and mechanical characterization tests were carried out on the obtained specimen showing the potential of the process and its industrial feasibility.(c) 2023 …

Lightweight Alloys Recycling and Processing through Innovative Friction Based Direct Technologies

In the last decades, the use of lightweight alloys has been spreading in almost any industrial field thanks to the relevant weight reduction allowed by the use of such materials. On the other hand, aluminium alloys are characterized by high-energy demands primary production cycles that are responsible for a relevant share of the global CO2 emissions. In order to limit and reverse such phenomenon, putting in place strategies to keep the material in the circle over multiple life cycles is mandatory and the concepts of circular economy, closed loop society and industrial symbiosis are progressively gathering more and more pace. Nevertheless, metal scraps are often mainly composed of chips resu…